Home
Product Catalog
Instruments & Meters
Moisture Meters
Sound Level Meters
Anemometers
LUX Meter
Humidity/Temperature Meter
Thickness Meter
Vibration Meter
Hardness Tester
Leeb Hardness Tester
Mechanical Equipment
Ultrasonic Flaw Detector
Infrared thermometer
Tachometers/Stroboscope
Surface Roughness Meter
 Insulation Tester
PH Meters
Gas Detectors
Metal Detector
Digital Manometer
Datalogger
Gloss Meter
Dew Point Meter
Hardness Tester
Alcohol Tester
Ultrasonic Cleaner
Audio Processor
Battery Tester
Clamp meter
Infared Imager
Airflow Meter
Power Analyzer
Digital Multimeter
Digital Oscilloscope
Laser Rangefinders
Auto Diagnostic Tools
Gensets Parts
Pipe Inspection Equipment
 Integrated Rebar Detector
Thermocouple process calibrator
viscometer
Company History
Factory Tour
Quality Control
Certifications
Company Service
News
Documents
Contact Us

Product Catalog 

 

HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod

  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
  • HAT530N New Smartgen Genset ATS Controller Replaced HAT260 Generator Control Mod
Model No.︰HAT530N
Brand Name︰HAT
Country of Origin︰China
Minimum Order︰1 pc
Share on:

 Total 36 Related Items 
Prev1314151617Next

Product Description

The powerful Microprocessor contained within the HAT530N ATS controller allows for precision voltage (2-way 3-phase/single phase) measuring and make accurate judgment on abnormal voltage (power lost, over/under voltage, over/under frequency, loss of phase, phase sequence wrong) and control ATS to transfer after the delay has expired. This controller is suitable for NO Breaking ATS and ONE Breaking ATS. When #1 power is abnormal, the controller will send signal to start genset after the “#1 abnormal delay” has expired. “Three remote” (remote control, remote measurement and remote communication)

Function can be implemented with the help of LINK communication port.

 

 

 

Function Item Parameter
Display LED
AC System 1P2W/2P3W/3P4W
Alternator Voltage (170~277)V(ph-N)
Alternator Frequency 50/60Hz
Monitor Interface LINK
Programmable Interface LINK
Switch Over Priority .
Applicable Switch Type NO Breaking ATS and ONE Breaking ATS
Case Dimensions(mm) 139*120*50
Panel Cutout(mm) 130*111
Operating Temp. (-25~+70)℃

 Performance and characteristics

Its performance and characteristics are shown as below,

  1. Measure and display 2-way 3 phase Voltage and Frequency

  2. Over/under voltage, loss of phase, phase sequence wrong, over/under frequency protection function. As default, phase reverse sequence protection and over/under frequency protection are disable; however, users can set the protection function as need.

  3. Parameters can be set via PC software using SG72 module (USB to LINK) or other converse module.

  4. The voltage normal delay of 1# or 2# can be set in (0~60) seconds and the Genset start delay can be set in (0~3600) seconds.

  5. The voltage abnormal delay of 1# or 2# can be set in (0~60) seconds and the Genset stop delay can be set in (0~3600) seconds.

  6. “1# power priority”, “Auto/Manual”, “No priority” and “2# power priority” can be set via controller front panel.

  7. Closing output signal can be set as on intervals or as continuous output.

  8. Applicable for 2 isolated neutral line.

  9. Auto/Manual mode. In manual mode, ATS transfer can be implemented via panel pushbutton.

  10. LEDs mounted on front panel can clearly show ATS running status.

  11. Forced Open input port been designed; When the input port is active, the switch will be Breaking position forcedly (woks for the ATS with Breaking Position).

  12. AUX.OUTPUT 1 and AUX.OUTPUT 2 can be configured to make it easy to transfer power supply.

  13. The output contact capacity of 1# and 2# power supply transfer relay (1#CLOSE, 2#CLOSE) is 5A AC250V, passive contact, can be directly used in driving switch to transfer.

  14. The output contact capacity of Genset start relay (GENS START) is 7A AC250V/7A DC28V, passive N/C contact.

  15. Suitable for various AC systems (3 phase 4-wires, 2-phase 3-wires and single-phase 2-wire).

  16. Modular design, retardant ABS plastic shell, pluggable terminal, built-in mounting,compact structure with easy installation. 

Ying

Price Terms︰EXW
Payment Terms︰Paypal/Credit Card/TT
Packing︰Carton
Lead Time︰2days
Product Image













Related Products
Smartgen FPC915 Engine Fire Pump Control Module with USB/RS485
Smartgen FPC915 Engine Fire Pump Control Module with USB/RS485
US $ 600
Smartgen CMM366A-4G Cloud Monitoring Communication Module
Smartgen CMM366A-4G Cloud Monitoring Communication Module
New SmartGen HGM7220 Genset Controller Used for Genset Automation
New SmartGen HGM7220 Genset Controller Used for Genset Automation
US $ 260
HGM9310CAN Genset Controller Used For Genset Automation
HGM9310CAN Genset Controller Used For Genset Automation

Home  |  Product Catalog  |  Company History  |  Factory Tour  |  Quality Control  |  Certifications  |  Company Service  |  News  |  Documents  |  Contact Us  |  Sitemap  |  Mobile Version
Powered by DIYTrade.com
HomeContact UsSitemap