ANL-20 Digital Torque Meter Peak Value Sampling Frequency 2000HZ
The ANL digital torque meter is specially designed for measuring all kinds of torque.
It is suitable for all kinds of torque measurement and adjust components reverse destructive test and so on.
This product Mainly used in measuring all kinds of electric and air torque, bottle opener, screwdriver, torque wrench,
tighten torque instrument and product, widely applies in the electrical manufacture, the machine manufacture,
the automobile light industry and the specialized scientific research and industry.
1:High accuracy, high resolution, and stability. The sampling speed can be set.
2:Fluctuate limiting value set, has the acousto-optic alarm device.
3:Lattice type LCD, the back light can be set.
4:Torque directions identify.
5:Three kind of unit: N · m, kg · cm, lb · in automatic conversion.
6:Many kinds of front values maintain.
7:Power source shows and low power prompt.
8:No-operation close automatically, can set the close time.
9:Saves and prints 100 test data, can clean out at will.
10Uses the USB connect to the PC, examine real-time, survey curve, and carries on processing to the data:
|Measuring range / Division value
|Peak Value Sampling Frequency
||8.4V 1.2VX7 Ni-MH Battery group
|Continuous using time of battery
||About 10 Hours
||With printer: 230 mm x 95 mm x 180 mm
|No printer: 230 mm x 70 mm x 125 mm
||With printer: 4 KG No printer: 2 KG
||Input: Optional, Output: DC 10 V 300 mA
Edited by Mina