1.High performance:The Gauge is designed for non-destructively measuring the thickness of coating and painting.
2.Data Storage: Four groups of data can be saved, each group of up to 80 data points.
3.Data analysis: statistics/average/maximum/minimum/standard variance.
4.With USB interface: for data transmission.
5.Has auto power off:low battery and error indication function.
1.This is a coating thickness gauge,can measure coating thickness on ferrous (FE) and non-ferrous (NFE)materials.
2.The gauge takes the precision integrated probe,automatic identification of iron and non-ferrous substrates.
3.Suitable for:paint/enamel/ chrome on steel, paint and anodizing coating on aluminum/copper.
Two measure modes: single and continuous.
Three probe modes: auto, magnetic and eddy current.
Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe).
Measuring Range: 0~2000μm(0 to 78.769mil)
Accuracy: (F-probe:3%+1μm), (N-probe:3%+1.5μm)
Resolution: 0~99.9 (0.1μm); 100~999 (1μm); ＞1000μm (0.01mm).
Two group modes: direct (DIR) and general (GEN), readings will be lost when power off in direct mode, and not be lost in general mode.
1 x CCT01 Thickness Gauge
1 x Fe Substrate
1 x Al Substrate
1 x USB Cable
1 x Software CD
5 x Calibration Card
1 x Technical manual
1. Please allow 0-1 inch error due to manual measurement. Thanks for your understanding.
2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from real object.