BTH02 Double Channel USB HIGH ACCURACY TEMP/HUMIDITY DATA LOGGER interface
This data logger measures and stores up to 32,000 humidity(0 to 100%RH) and temperature(-35 to 80C(-31~176F)) readings. Dew point and more professional applications can be provided by the PC software DGraphTM. Logger status, alarm indication and low battery indication are via flashing red/green LED and yellow LED. The button on housing can be used to start logging, or confirm and clear LED alarm when LED alarm is hold status.
User can plug data logger straight into PC\'s USB port without any cables. Before getting started, user need to install USB driver and DGraphTM software, provided on the CD which is included in product packing box. All the software can run under Windows XP, Vista, 7 or 8(32 bit and 64 bit Versions). User can easily use DGraphTMsoftware to setup sample rate(from 10 seconds to 12 hours), high/low alarm limit and start/stop method , and download data to PC, etc. And then user can view, analyse and print the data, or export other file formats(txt, xsl, csv, bmp, jpg).
Especially, for some professional applications, user can set access password, name each channel, enable/disable specified channel, input calibration data for each channel, disable LED indication for saving power, and select sample mode(Instant, Average, Maximum and Minimum), etc.
USB interface directly communicate with PC for setup and data download
User can set access password for data logger
User can name each channel and enable/disable specified channel freely
LED alarm enable/disable, LED alarm hold enable/ disable and alarm limit settings for all channels via DGraph
User can input formula to customize compound graph from selected logging data
User can create and customize new unit easily and freely for all measurement parameters
Logging status indication via red/green LED and battery status indication via yellow LED
Start logging method: Immediately, Button, Delayed
Edited by Cara