3044195 Diesel Engine Speed Control Unit EFC3044195 Electric Speed Governor Replace For Generator Speed Controller
Specification:
Rpm stability: <± 0.25%
Speed range: 1KHz ~ 6.5KHz
Thermal stability: Max ± 0.7%
Idle regulation: 260 ± 20Hz
Droop regulation: Minimum 15Hz ± 6Hz/ 1 amp
Maximum: 400Hz ± 75Hz/ 1 amp
External speed regulation: ± 200Hz (with 1 kω Connected)
Aux input sensitivity: 148Hz / 1v., ± 10Hz
Impedance: 1mω
Working temp range: -40 ~ 85
Environment:
Working humidity range: Maximum 95%
Stocking temp: -55 ~ 92
Shocking: 20-100Hz 500mm/sec.
Input power supply
Voltage: 24v
Grounding pole: Negative pole
Power supply: 40ma
Actuator continuous current: Minimum 1a, maximum 4.5a
Mpu
Signal: 2 ~ 120v RMS
Note: Above-mentioned parameters are tested with
| 3044195 |
| Input |
Supply |
24 VDC ±20% |
| |
Polarity |
Negative Ground (Case Isolated) |
| |
Power Consumption |
40 MA |
| |
Maximum Actuator Current |
4.5 A continuous |
| |
Speed Sensor Signal |
2-120 Volts RMS |
| Performance |
Isochronous Operation/Steady State Stability |
±0.25% or better |
| |
Speed Range/Governor |
1K to 6.5K Hz continuous |
| |
Speed Drift with Temperature |
±1 Max |
| |
Idle Regulation |
260±20 Hz |
| |
Droop Adj. Max. |
400 Hz., ±75Hz. Per 1.0A change |
| |
Speed Trim Range |
±200 Hz with 1 ohm connected |
| |
Remote Variable Speed Range |
25 to 100% of rated speed |
| |
Impedance |
1m ohms |
| Environmental |
Ambient Operating Temperature Range |
-40 to +85 Deg. C |
| |
Relative Humidity |
Up to 95% |
| |
All Surface Finishes |
Fungus Proof and Corrosion Resitant |
| Reliability |
Vibration |
20 to 100 Hz. 500mm/sec |
